THE SERVICE

• The Dalby Service Centre provides a full service and breakdown response facility. Operating from our factory in Wigston, Leicestershire, which is ideally situated in the centre of the country.
• Dalby's own trained, Corgi registered engineers provide coverage for the whole of the UK (and overseas available).
• Our engineers work on all aspects from wiring and commissioning through to servicing and rectification work.
• The engineer's vehicles are fully stocked with a comprehensive range of spares to ensure that breakdowns are dealt with effectively ensuring the minimum amount of downtime for the customer.
• With over twenty years experience the Dalby Service team provides support for all types of spraybooths.
• Filters are readily available for all types of spray booths and various applications that include breathing air filter regulators, catering, engineering and shot blasting. Quotations are available on request.

SERVICE CENTRE

The Company

Harry Dalby Engineering Ltd have been market leaders in the design, manufacturing and servicing of spray booth/oven equipment since 1982. In 1987 the company purchased its existing 1.2 acre site in Wigston, Leicestershire, and built a modern 39,000 sq. ft. factory and office complex. Since its inception the company has prided itself on providing it's customers with a first class, cost effective break down & servicing facility for all types of spray booth/oven equipment.

With over forty years combined experience in the spray booth marketplace the current service management team have a broad knowledge of all types and makes of spray booth/oven equipment. Supported by our dedicated team of in house Dalby trained service engineers we are able to provide nationwide coverage for all makes of spray booth/oven equipment. For rapid response and rectification of faults we carry a wide range of replacement parts for all types of Dalby booths and most other non-Dalby spray booth/oven equipment.

Preventative Maintenance and L.E.V.

Dalby advise that regular servicing and preventative maintenance is essential for the continued high performance and reliability of spray booth equipment. Dalby recommend that most spray booths should be serviced either annually, or every 1,000 hours of operation. It is a requirement under current legislation that all spray booths be subjected to a L.E.V (Local Exhaust Ventilation) test every fourteen months. This test is conducted to check the overall condition of the booth cabin, doors and air handling plant to check that it is still able perform to it's original design specification.

In order to comply with the current legislation and guarantee the performance levels for spray booth/ovens Dalby complete a full L.E.V. inspection test on all equipment serviced by our engineers. This testing procedure is provided as part of our normal service package and is not an added extra. We then provide customers with official certification for all equipment passing the L.E.V test. Further advise is offered to customers where equipment fails the L.E.V testing to enable equipment to be repaired or upgraded to obtain official certification.

Maximum Spray Booth Performance

To attain maximum spray booth performance it is vital that the correct filters are fitted to both the air input and extraction systems and that they are changed at the required intervals. Dalby have a dedicated filter division, Direct Discount Filters (D.D.F.), who provide a vast range of filters for all types of spray booths. For maximum performance we only offer the highest quality products.

Filter standing orders and next day deliveries are available.

Filter sales personnel can visit your site to offer advice and assess your requirements and provide competitive quotations for any type of spray booth.

Home / X / Q / HiAir / Aqua-Dry / CV / Quality Assurance / Service Centre / Filters / Contact List / Enquiries